Dynamic Suspensions

Home | Site Map

Dynamic Suspensions' SpecFinder^TM software is a fully predictive damper model, based on the governing hydraulic equations.

It is not simply a database. It is effectively a software representation of the hardware used to construct the DSSV damper. By selecting the appropriate cartridges from the available valve library, you can visualise the resultant F-V characteristics of the damper.

Drop-down menus allow you to select both the High Speed DSSV valves for bump and rebound, as well as the actual on-car adjuster settings for all 4-off valves.

You can scan through the adjusters via the menus, or select the 'sweep' facility.

This allows you to visualise the full range of on-car adjustments, enabling you to gauge the available range for adjustment from the current setting. This is true for both the high and low speed valves, in both bump and rebound.

SpecFinder^TM integrates with Dynamic Suspensions Dynosoft^TM damper dyno software.

SpecFinder^TM is effectively a software damper dyno, eliminating the need for extensive dyno testing and effectively saving both time and trouble.

SpecFinder^TM includes advanced graph-control features, allowing you to zoom into user-defined areas (specific velocity ranges), to look in more detail at the F-V characteristics.

SpecFinder^TM integrates not only with Dynamic Suspensions Dynosoft^TM damper dyno software, but can also transfer data to and from MS Excel, using the 'Copy and Paste' feature.

SpecFinder^TM is effectively a software damper dyno, eliminating the need for extensive dyno testing and effectively saving both time and trouble. It is as convenient as simply working at your laptop/computer.

SpecFinder^TM features:

Damping force prediction. Due to the analytically determinant nature of the dampers, SpecFinder^TM accurately predicts the F-V characteristic across the velocity and frequency range and at all adjuster settings.
User-friendly. SpecFinder^TM is well proven in a number of applications, it is easy to determine what valve or adjustment changes are required to match an existing damper curve.
Integrated. It also interacts with Dynamic Suspension's Dynosoft^TM software to either download a reference damper curve or upload actual damper results to match.
Target damper F-V characteristics can be imported into SpecFinder^TM from MS Excel simply by using the “copy and paste” feature. The resultant F-V curve can then be easily exported back into Excel, or another suitable application, directly from SpecFinder^TM.

MTCE Limited, 20 Fison Way, Thetford, Norfolk, IP24 1HJ
Registered in England No. 2714436
VAT Registration No. GB595 3022 36
Registered Office: Shakespeare House, 42 Newmarket Road, Cambridge, CB5 8EP